configs: define CONFIG_SPL_SIZE_LIMIT

A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define
the board specific maximum size for the SPL file.

Use Makefile function size_check() to implement the test.

Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following
is thrown:

spl/u-boot-spl.bin exceeds file size limit:
  limit:  30720 bytes
  actual: 33426 bytes
  excess: 2706 bytes
make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1

Signed-off-by: Heinrich Schuchardt <[email protected]>

diff --git a/Kconfig b/Kconfig
index a02168690f5b19e060ccfe9b3e7751b38bd71fe4..709912e1340129db922ea414a0653f332b397bbb 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -173,6 +173,14 @@ config TPL_SYS_MALLOC_F_LEN
          particular needs this to operate, so that it can allocate the
          initial serial device and any others that are needed.
 
+config SPL_SIZE_LIMIT
+       int "Maximum size of SPL image"
+       depends on SPL
+       default 0
+       help
+         Specifies the maximum length of the U-Boot SPL image.
+         If this value is zero, it is ignored.
+
 menuconfig EXPERT
        bool "Configure standard U-Boot features (expert users)"
        default y

diff --git a/Makefile b/Makefile
index af2ab4e0194484972f128e2bb7ad4f837e1a74e6..da8a38da63c2cc40c6cced3f93d51e760f53d763 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -796,6 +796,12 @@ else
 BOARD_SIZE_CHECK =
 endif
 
+ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
+SPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_SPL_SIZE_LIMIT))
+else
+SPL_SIZE_CHECK =
+endif
+
 # Statically apply RELA-style relocations (currently arm64 only)
 # This is useful for arm64 where static relocation needs to be performed on
 # the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1712,6 +1718,8 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
 
 spl/u-boot-spl.bin: spl/u-boot-spl
        @:
+       $(SPL_SIZE_CHECK)
+
 spl/u-boot-spl: tools prepare \
                $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
                $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)